pb rohs compliant ||||||||||||||| ase3 series ? ccd clock for vtr camera ? equipment connected to pc or pc cards ? thin equipment ? compact and low in height ? low current consumption ? tri state function ? suitable for high density smt ? tight stability option ? seam sealed package revised: 1.03.08 3.2 x 2.5 x 0.9mm ? ir reflow capable freq. (mhz) tr/tf max (nsec) table 1 - input current idd max. (max. ma) i 0c to +50c d -10c to +60c e -20c to +70c f -30c to +70c n -30c to +85c l -40c to +85c contact abracon for wider temperature range. ase3 - frequency - - - operating temp. ran g e packaging t tape and reel 1.8vdc cmos compatible smd crystal clock oscillator abracon is iso 9001 / qs 9000 certified abracon is iso 9001 / qs 9000 certified 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com options & part identification: (left blank if standard) standard specifications: applications: features: ~ 30 mhz 4 10 max. ~ 75 mhz 6 10 max. ~ 133 mhz 12 10 max. j(*) 20ppm r 25ppm k 30ppm h 35ppm b 40ppm c 50ppm y l n o e d n a , d , i s n o i t p o p m e t overall frequency frequency range abracon p/n operating temperature storage temperature overall frequency stability supply voltage (vdd) input current symmetry rise and fall time (tr/tf) output load output voltage tristate function peak to peak jitter rms jitter parameters 0.625 ~ 133 mhz ase3 series -10c to + 70c (see options) -55c to + 125c 100 ppm max. (see options) 1.8 vdc 5% see table 1 45/55% @ 50%vdd see table 1 32ps (typical) 4.5ps (typical) 15 pf (max) voh = 0.9* vdd min. vol = 0.1* vdd max. "1" (vih >= 1.62 vdc) or open: oscillation "0" (vil < 0.18 vdc) : hi z stand-by current: 10 a max.
pb rohs compliant ||||||||||||||| ase3 series revised: 1.03.08 3.2 x 2.5 x 0.9mm 1.8vdc cmos compatible smd crystal clock oscillator abracon is iso 9001 / qs 9000 certified abracon is iso 9001 / qs 9000 certified 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com dimensions: inches (mm) dimensions: mm outline drawing: tape & reel: note: the outline package configuration varies with frequency range. electrical properties, pin configuration, and land pattern are the same. it is recommended to use an approximately 0.01uf bypass capacitor between pin 2 and pin 4. 1 2 3 pin function 4 vdd tri-state gnd/case output
|